[QUOTE=Pat Colongione;14897]We have been testing the pureflow water since we started. We do the same kind of testing as we did on the Freni and RO.
I have given the instructions on how we do this on one of the threads. I believe Bill P asked for it.
Pat[/QUOTE]
Pat;
What type of testing are you doing on the pureflow???
You say same kind of testing as on the Freni and RO…
As I stated above we did daily testing of the water… Chlorine, hardness, and PH. when we were using the Freni.
Are you doing this type of testing on the Pureflow???
I also did testing for bacteria in the water system after we did our monthly disinfecting with renalin of the water system… Using Heterotrophic plate count sampler and an incubator… This was done on the day that we did not dialize… 12 hrs and 24 hour to grow the bacteria… if was over the min we would have to disinfect the water system again and test again before using the RO…
When you say testing the Pureflow… do you just collect the water and send it to the a lab and have them perform the testing??? If not what are you testing for??? or what is the lab testing for???
The only test we were trained to do is after a batch is complete we test for chlorine/chloramine with a test strip. (When the control panel displays:CHECK CHLORAMINES.
HemoHelper